Rack Rental

As a network engineer, you will be handling real networking devices… not simulations!

Pursuing a Cisco Certification is great achievement. Preparing for the certification exam is not just studying the theory; it requires lot of lab practice to be done along with theory.

Many simulation software’s are available in market but they can’t replace the actual Cisco devices. Not all the labs can be practiced using those software’s. Software may hang in between. Response time of real device and simulated device differs; hardware inputs cannot be generated by any program. As the number of devices grows in simulation, your PC resources(CPU utilization and RAM requirement) limitations comes into picture and you get stuck in resources. So the choice of using simulation may lead to wastage of time, and incomplete knowledge producing lack of confidence in you. Building your own rack is one option but not everyone can go for it. Another option is using a rented rack.

We provide racks for CCNA, CCNP and CCIE Routing and Switching certifications at very reasonable pricing. Get hands-on experience of real devices and be confident about your achievement.
Rent a rack to be confident about your Cisco Certifications Exam preparation. We provide this service at a very reasonable and affordable pricing.

Get 40% discount in “Happy Hours”

Happy Hours: 11:00pm to 6:00am IST

For any further details feel free to contact us at enquiry@vertexitservices.com or call us on

(+91) 9767 430 430
(+91) 9763 9763 33

Devices Details:

CCIE R&S v5

Routers (IOS 15.0): 10

Switches: 3560G with Fiber connectivity and 15.0 IOS – 1 No. Switch 3750 – 3 Nos.

Minimum Slot: 4 Hours

CCNP

Routers (IOS 15.0): 6

Switches: 3560G with Fiber connectivity and 15.0 IOS – 1 No. Switch 3750 – 3 Nos.

Minimum Slot: 4 Hours

CCNA

Routers (IOS 15.0): 3

Switches: 3560G with Fiber connectivity and 15.0 IOS – 1 No. Switch 3750 – 3 Nos.

Minimum Slot: 4 Hours

Note: You need a terminal software installed on your PC, Laptop or any other device capable to run a software like Hyper Terminal, Putty, SecureCRT or any other terminal software. You may need to select the application to be used for telnet purpose.